BCR100

Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens and sheet aluminum end caps.

Fixture mounts to closet walls with machined aluminum cup-style holders.

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).

Satin anodize finish also available (may require additional lead time).

Available for closet openings of 12”–96” nominal.

Fixed length or adjustable intermediate supports required for 36” and longer fixtures with 33 lbs. capacity for every 36” of length between supports.

Fixtures wired with 10’ low voltage leads.

Included standard remote 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available).

Standard output is 520 lumens per foot.

LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical.

Life: 50,000 hours L₇₀.

Limited five year warranty.

UL and C-UL listed for storage spaces.

IBEW manufactured and assembled

Made in U.S.A.

IPR5MS-OCC

Fully assembled housing is formed and welded, 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Model variations offered for surface, cable suspended and pendant mount applications
Available in standard white, black, silver, platinum, bronze and primer powder coat, applied post production (consult factory for custom finishes)
Includes frosted or linear prismatic acrylic lens
Includes passive infrared occupancy sensor
Available for one or two T5 14W, 21W, 28W, 35W and high output 24W, 39W, 54W, 80W linear fluorescent lamps in single and some tandem lengths
Standard ballast is specification grade 120V-277V program start (consult factory for other voltage options)
Dimming, emergency battery backup and specialized ballast factor options available (consult factory for availability and system compatibility
Knock-outs on back accept standard electrical fittings by others (consult factory for other locations)
Rotational locking lamp holders
UL and C-UL listed for dry and damp locations
IBEW manufactured and labeled
Made in the U.S.A.

IEL5DS

Fully assembled housing is formed 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Model variations offered for surface, cable suspended and pendant mount applications
Available in standard white, black, silver, platinum, bronze and primer powder coat, applied post production (consult factory for custom finishes)
Available for two T5 14W, 21W, 28W and 35W and hight output 24W, 39W, 54W, 80W linear fluorescent lamps in single and some tandem lengths
Standard ballast is specification grade 120V-277V program start (consult factory for other voltage options)
Dimming, emergency battery backup and specialized ballast factor options available (consult factory for availability and system compatibility)
Knock-outs on back accept standard electrical fittings by others (consult factory for other locations)
Rotational locking lamp holders
UL and C-UL listed for dry and damp locations
IBEW manufactured and labeled
Made in the U.S.A.

BFL257

Fully assembled housing is formed and welded, 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Standard finish is high reflectance white powder coat, applied post production
Knock-outs accept standard electrical fittings (by others)
Available for two T8 13w, 14W, 15W, 17W, 25w, 32W or 40W linear fluorescent lamps
Standard 120V or 277V electronic high power factor ballast is pre-wired to the lamp holders (consult factory for other voltage options)
Dimming ballast and emergency battery back up options available (consult factory for availability and system compatibility)
UL and C-UL listed for dry and damp locations
IBEW manufactured and labeled
Made in the U.S.A.

BFL800

Fully assembled housing is formed and welded, 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Standard finish is high reflectance white powder coat, applied post production
Knock-ours accept standard electrical fittings (by others)
Rotational locking lamp holders
Available for one, two or three T8 17W, 25W, 32W, 40W or 59W linear fluorescent lamps
Standard 120V or 277V electronic high power factor ballast is pre-wired to the lamp holders (consult factory for other voltage options)
Dimming ballast and emergency battery back up options available (consult factory for availability)
UL and C-UL listed for dry and damp locations
IBEW manufactured and labeled
Made in the U.S.A.

BFL250

Fully assembled housing is formed, 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Standard finish is high reflectance white powder coat, applied post production
Installed end feed connector accepts 3/8″ steel flex conduit (available separately)
Wired with 12′ leads for instant start ballast operation
Easy mounting through provided holes in housing
Available for T8 13W, 14W, 15W, 17W, 25W, 32W or 40W linear fluorescent lamp in single and tandem lamp models
UL and ULC listed for dry and damp locations
Requires a remote ballast and enclosure (ordered separately)
IBEW manufactured and labeled
Made in the U.S.A.

NOTE: Lamp holders are wired for instant start ballasts. For rapid start wiring, add suffix “/RS” to catalog number.

BFL282

Fully assembled housing is formed and welded, 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Standard finish is high reflectance white powder coat, applied post production
Knock-outs accept standard electrical fittings (by others)
Rotational locking lamp holders
Available for two T5 8W, 13W, 14W, 21W, 28W, 35W and high output 24W, 39W, 54W, 80W linear fluorescent lamps
Standard 120V or 277V electronic high factor ballast is pre-wired to the lamp holders (consult factory for other voltage options)
Dimming ballast and emergency battery back up options available (consult factory for availability and system compatibility)
UL and C-UL listed for dry and damp locations
IBEW manufactured and labeled
Made in the U.S.A.

BFL281

Fully assembled housing is formed and welded, 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Standard finish is high reflectance white powder coat, applied post production
Knock-outs accept standard electrical fittings (by others)
Rotational locking lamp holders
Available for T5 6W, 8W, 13W, 14W, 21W, 28W, 35W and high output 24W, 39W, 54W, 80W linear fluorescent lamps
Standard 120V, 277V, or Universal electronic high power factor ballast is pre-wired to the lamp holders
Dimming ballast options available (consult factory for availability and system compatibility)
UL and ULC listed for dry and damp locations
IBEW manufactured and labeled
Made in the U.S.A.

NOTE: Includes program rapid start ballast except for 8W and 13W models which includes an instant start ballast.

MiT5

Fully assembled housing is formed and welded, 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Standard finish is high reflectance white powder coat, applied post production
Knock-outs accept standard electrical fittings (by others)
Rotational locking lamp holders
Available with different socket locations: MiT5-1T, MiT5-1S, MiT5-2S, MiT5-RA
Available for one or two T5 14W, 21W, 28W, 35W and high output 24W, 39W, 54W, 80W linear fluorescent lamps
Standard 120V or 277V, 50-60Hz electronic high power factor ballast is pre-wired to the lamp holders
Dimming and emergency battery back up options available (consult factory for availability and system compatibility)
UL and ULC listed for dry and damp locations
IBEW manufactured and labeled
Made in the U.S.A.

NOTE: Includes program rapid start ballast.

IPR8S

Fully assembled housing is formed 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Model variations offered for surface, cable suspended and pendant mount applications
Available in standard white, black, silver, platinum, bronze and primer powder coat, applied post production (consult factory for custom finishes)
Includes frosted or linear prismatic acrylic lens
Available for T8 17W, 25W, 32W and 40W linear fluorescent lamps in single and some tandem lengths
Standard ballast is specification grade 120V-277V program start (consult factory for other voltage options)
Dimming, emergency battery backup and specialized ballast factor options available (consult factory for availability and system compatibility)
Knock-outs on back accept standard electrical fittings by others (consult factory for other locations)
Rotational locking lamp holders
UL and C-UL listed for dry and damp locations
IBEW manufactured and labeled
Made in the U.S.A.

IPR8R

Fully assembled housing is formed 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Model variations offered for surface, cable suspended and pendant mount applications
Available in standard white, black, silver, platinum, bronze and primer powder coat, applied post production (consult factory for custom finishes)
Includes frosted or linear prismatic acrylic lens
Available for T8 17W, 25W, 32W and 40W linear fluorescent lamps in single and some tandem lengths
Standard ballast is specification grade 120V-277V program start (consult factory for other voltage options)
Dimming, emergency battery backup and specialized ballast factor options available (consult factory for availability and system compatibility)
Knock-outs on back accept standard electrical fittings by others (consult factory for other locations)
Rotational locking lamp holders
UL and C-UL listed for dry and damp locations
IBEW manufactured and labeled
Made in the U.S.A.

IPR8MS

Fully assembled housing is formed 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Model variations offered for surface, cable suspended and pendant mount applications
Available in standard white, black, silver, platinum, bronze and primer powder coat, applied post production (consult factory for custom finishes)
Includes frosted or linear prismatic acrylic lens
Available for T8 17W, 25W, 32W and 40W linear fluorescent lamps in single and some tandem lengths
Standard ballast is specification grade 120V-277V program start (consult factory for other voltage options)
Dimming, emergency battery backup and specialized ballast factor options available (consult factory for availability and system compatibility)
Knock-outs on back accept standard electrical fittings by others (consult factory for other locations)
Rotational locking lamp holders
UL and C-UL listed for dry and damp locations
IBEW manufactured and labeled
Made in the U.S.A.

IEL5H

Fully assembled housing is formed and welded, 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion, cast aluminum lamp standoffs and socket caps.

Model variations offered for surface, cable suspended and pendant mount applications

Options include perforated metal shields and extruded acrylic lenses (options must be produced with the fixture at time of manufacture)

Accessories include an aluminum louver, perforated metal lamp cover and frosted acrylic lamp tube

Available for T5 14W, 21W, 28W, 35W and high output 24W, 39W, 54W, 80W lamps in single length, some tandem lengths and continuous runs

Standard ballast is specification grade 120V-277V program start (consult factory for other voltage options)

Dimming, emergency battery backup and specialized ballast factor options available (refer to supplemental ballast details sheet for availability)

Knock outs on back of surface mount model accept standard electrical fittings by others (consult factory for other locations)

UL and C-UL listed for dry and damp locations

IBEW manufactured and assembled

Made in U.S.A.

IEL5R

Fully assembled housing is formed 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Model variations offered for surface, cable suspended and pendant mount applications
Available in standard white, black, silver, platinum, bronze and primer powder coat, applied post production (consult factory for custom finishes)
Installed feed connector on rear accepts 3/8″ steel flex conduit
Wired with 12′ leads for rapid start ballast operation
Available for T5 14W, 21W, 28W, 35W and high output 24W, 39W, 54W, 80W linear fluorescent lamps in single and some tandem lengths
UL and C-UL listed for dry and damp locations
IBEW manufactured and labeled
Made in the U.S.A.
Requires a remote ballast and enclosure (ordered separately)

IPR5R

Fully assembled housing is formed 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Model variations offered for surface, cable suspended and pendant mount applications
Available in standard white, black, silver, platinum, bronze and primer powder coat, applied post production (consult factory for custom finishes)
Includes frosted or linear prismatic acrylic lens
Available for T5 14W, 21W, 28W, 35W linear fluorescent lamps in single and some tandem lengths
Standard ballast is specification grade 120V-277V program start (consult factory for other voltage options)
Dimming, emergency battery backup and specialized ballast factor options available (consult factory for availability and system compatibility)
Knock-outs on back accept standard electrical fittings by others (consult factory for other locations)
Rotational locking lamp holders
UL and C-UL listed for dry and damp locations
IBEW manufactured and labeled
Made in the U.S.A.

IPR5MS

Fully assembled housing is formed and welded, 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Model variations offered for surface, cable suspended and pendant mount applications
Available in standard white, black, silver, platinum, bronze and primer powder coat, applied post production (consult factory for custom finishes)
Includes frosted or linear prismatic acrylic lens
Available for T5 14W, 21W, 28W, 35W and high output 24W, 39W, 54W, 80W linear fluorescent lamps in single and some tandem lengths
Standard ballast is specification grade 120V-277V program start (consult factory for other voltage options)
Dimming, emergency battery backup and specialized ballast factor options available (consult factory for availability and system compatibility
Knock-outs on back accept standard electrical fittings by others (consult factory for other locations)
Rotational locking lamp holders
UL and C-UL listed for dry and damp locations
IBEW manufactured and labeled
Made in the U.S.A.

IEL5C

Fully assembled housing is formed 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Model variations offered for surface, cable suspended and pendant mount applications
Available in standard white, black, silver, platinum, bronze and primer powder coat, applied post production (consult factory for custom finishes)
Available for T5 14W, 21W, 28W, 35W and high output 24W, 39W, 54W, 80W linear fluorescent lamps in single and some tandem lengths
Standard ballast is specification grade 120V-277V program start (consult factory for other voltage options)
Dimming, emergency battery backup and specialized ballast factor options available (consult factory for availability and system compatibility
Knock-outs on back accept standard electrical fittings by others (consult factory for other locations)
Rotational locking lamp holders
UL and C-UL listed for dry and damp locations
IBEW manufactured and labeled
Made in the U.S.A.

MiT8

Fully assembled housing is formed and welded, 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Standard finish is high reflectance white powder coat, applied post production
Knock-outs accept standard electrical fittings (by others)
Rotational locking lamp holders
Available for one or two T8 17W, 25W, 32W or 40W linear fluorescent lamps
Standard Universal voltage electronic high power factor ballast is pre-wired to the lamp holders
Dimming and emergency battery back up options available (consult factory for availability and system compatibility)
UL and ULC listed for dry and damp locations
IBEW manufactured and labeled
Made in the U.S.A.

IPR5S

Fully assembled housing is formed and welded, 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion
Model variations offered for surface, cable suspended and pendant mount applications
Available in standard white, black, silver, platinum, bronze and primer powder coat, applied post production (consult factory for custom finishes)
Includes frosted or linear prismatic acrylic lens
Available for T5 14W, 21W, 28W, 35W linear fluorescent lamps in single and some tandem lengths
Standard ballast is specification grade 120V-277V program start (consult factory for other voltage options)
Dimming, emergency battery backup and specialized ballast factor options available (consult factory for availability and system compatibility
Knock-outs on back accept standard electrical fittings by others (consult factory for other locations)
Rotational locking lamp holders
UL and C-UL listed for dry and damp locations
IBEW manufactured and labeled
Made in the U.S.A.

IST5S

Fully assembled housing is formed and welded, 20 ga. steel, chemically treated to resist corrosion and enhance paint adhesion