FATHOM BSW208
2” wide LED luminaire with flush lens, outdoor locations, remote driver
CutsheetExplore FathomDownloads
- Documentation
- Photometry
Features
The BSW208 is a linear LED luminaire for outdoor applications. The 2” wide by 3” tall extrusion is fitted with a flush, frosted acrylic lens and machined aluminum end caps. Surface or wall mount variants are available. Each fixture is paired with a remote mounted, wet location 0-10V dimming or non-dimming driver and housing.
Finishes
Performance
- Nominal Length: 4'
- Output: R: regular
- Lumens/ft.: R: 525
- Watts/ft.: R: 5.7
- Luminaire Lumens: R: 2125
- Efficacy (LPW): R: 92
Note: All data reflects fixtures with 3500K LEDs.
Specifications
Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens and machined aluminum end caps.
Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).
Available for surface or wall mounting in nominal lengths of 2’–8’ single fixtures and continuous runs.
Fixtures wired with 10’ low voltage leads and Ø7/8” hole for back feeding.
Included remote 120-277V wet location driver offered with 0-10V dimming or non-dim and surface mount aluminum enclosure.
Standard output is 525 lumens per foot.
LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical.
Life: 50,000 hours L70.
Limited five year warranty.
UL and C-UL listed for wet locations.
IBEW manufactured and assembled.
Made in U.S.A.
Product Data
Nominal Fixture Length
- 2: 24-5/8”
- 3: 36-5/8”
- 4: 48-5/8”
- 5: 60-5/8”
- 6: 72-5/8”
- 7: 84-5/8”
- 8: 96-5/8”
Actual dimension dependent on run configuration
Correlated Color Temperature
- 27: 2700K-90+ CRI
- 30: 3000K-90+ CRI
- 35: 3500K-90+ CRI
- 40: 4000K-90+ CRI
Driver
- RN: non-dimming
- RD: 0-10V dimming, 5%
Each fixture includes a remote driver matched for fixture length and light output
Mounting
- SM: surface mount
- WD: wall mount – direct
- WI: wall mount – indirect
Light Output
(lumens per foot)
- R: regular – 525
Run Configuration
- SN: single
- ST: starter
- AD: adder
- TR: terminator
Section
Mounting Options
- Use appropriate fastener through Ø3/16” holes in housing.
- 10' low voltage leads exit out the rear at an end.
Ordering Code: SM
- 1-7/8” H x 4-1/2” W sheet aluminum bracket projects the fixture housing 3/4” from the wall surface.
- Bracket finish matches fixture finish.
Ordering Code: WD
- 1-7/8” H x 4-1/2” W sheet aluminum bracket projects the fixture housing 3/4” from the wall surface.
- Bracket finish matches fixture finish.
Ordering Code: WI
