Downloads
- Documentation
- BIM Files
- Photometry
Features
The BFZ100-R is part of the dynamic Fractalz series linear LED luminaires. This flush mount design not only creates clean, linear runs of light but also serves as a mounting point for Fractalz Through-Space luminaires to project luminous lines into interior volumes.
Performance
- Nominal Length: 4'
- Output: R: regular | H: high
- Lumens/ft.: R: 665 | H: 1000
- Watts/ft.: R: 7.4 | 11.1
- Luminaire Lumens: R: 2653 | H: 3990
- Efficacy (LPW): R: 90 | H: 90
Note: All data reflects fixtures with 3500K LEDs
Specifications
Fixture constructed of an extruded aluminum housing, sheet formed plaster flanges and frosted acrylic lens
Fixture flush mounts in walls or hard ceilings and integrates with the Fractalz series Through-Space luminaires
Available in nominal lengths of 24”-96” at 6” intervals
Removable end plaster flanges convert single fixtures for use in continuous runs
Fixtures provided with 18 ga. wiring harness for 6 Amp maximum load
Standard integral 120-277V constant voltage driver offered with 0-10V dimming or non-dim
Standard outputs are 665 or 1000 lumens per foot
LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical
Life: 50,000 hours L70
Limited five year warranty
UL and C-UL listed for dry and damp locations
IBEW manufactured and assembled
Made in U.S.A.
Product Data
Nominal Fixture Length
- 24: 24"
- 30: 30"
- 36: 36"
- 42: 42"
- 48: 48"
- 54: 54"
- 60: 60"
- 66: 66"
- 72: 72"
- 78: 78"
- 84: 84"
- 90: 90"
- 96: 96"
Actual length dependent on interface A and B configuration
Correlated Color Temperature
- 27: 2700K-90+ CRI
- 30: 3000K-90+ CRI
- 35: 3500K-90+ CRI
- 40: 4000K-90+ CRI
Driver
- ND: non-dimming
- D: dimming, 0-10V, 10%
Light Output
(lumens per foot)
- R: regular – 665
- H: high – 1000
Interface Configuration A
- DE: dead end
- 45: 45° interface
Interface Configuration B
- DE: dead end
- 45: 45° interface
Section
