Bodhi Flush Lens BSS220
1-25/32” wide LED luminaire with flush lens, remote driver
CutsheetExplore BodhiDownloads
- Documentation
- Photometry
- BIM Files
Features
The BSS220 is a low profile, remote driven, linear LED luminaire for general lighting applications. The 2” tall by 1-25/32” wide extruded aluminum housing is capped with a flat, frosted lens that produces diffuse, seamless illumination. 1/4” thick machined aluminum end caps finish off the fixture ends.
Finishes
Performance
- Nominal Length: 45"
- Watts/ft: 8.4
- Total Watts: 32.1
- Luminaire Lumens: 2861
- Efficacy: 89
Note: All data reflects fixtures with 3500K LEDs
Specifications
Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens and machined aluminum end caps
Model variations offered for surface, and cable suspended applications
Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes)
Satin anodize finish also available (may require additional lead time)
Available in nominal lengths of 2’–8’ as single fixtures and continuous runs
Surface and mount fixtures wired with 10’ low voltage leads
Included standard remote 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available)
Remote mounted emergency battery backup available (ordered separately, consult factory for details)
Standard outputs are 5W and 8W nominal per foot
LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical
Life: 50,000 hours L70
UL and CUL listed for dry and damp locations
Limited five year warranty
IBEW manufactured and assembled
Made in U.S.A.
Product Data
Nominal Fixture Length
- 2: 23”
- 3: 34”
- 4: 45”
- 5: 56”
- 6: 67”
- 7: 78”
- 8: 89”
Actual dimension dependent on run configuration
Correlated Color Temperature
- 27: 2700K-90+ CRI
- 30: 3000K-90+ CRI
- 35: 3500K-90+ CRI
- 40: 4000K-90+ CRI
Driver
- ND: non-dimming
- D: 0-10V, 1%
- DTR: triac, 1%
- DLV: electronic low voltage, 1%
- HES: Lutron EcoSystem, soft-on/fade-to-black, 1%
- EL: eldoLED ECOdrive, 0-10V, 1%
- ES: eldoLED SOLOdrive 0-10V, 0.1%
- ELD: eldoLED ECOdrive DALI, 1%
- ESD: eldoLED SOLOdrive DALI, 0.1%
Note: Each fixture includes a remote driver matched for fixture length and light output
Watts/Foot
- 5: 5 W/ft.
- 8: 8.4 W/ft.
- CF: consult factory for custom output
Mounting
- SM: surface mount
- C4: cable mount 4’ cable length
- C8: cable mount 8’ cable length
- CF: consult factory for custom mounting
Run Configuration
- SN: single
- ST: starter
- AD: adder
- TR: terminator
Section
Mounting Options
- Use appropriate fastener through Ø3/16” holes in housing
- 10’ low voltage leads exit out the rear at an end
Ordering Code: SM
Mounting options include:
- Ø 1/16”x 48” (C4) or 96” (C8) aircraft cables
- 18 gauge x 60” (C4) or 108” (C8) power cable (in coordinating finish)
- Bracket bars
- Ø 5” white canopies
- Ceiling couplers
- Side exit cable grippers
Ordering Code: C4 & C8
