Downloads
- Documentation
- Photometry
- BIM Files
Features
The Bodhi series BSS260 is a rectilinear direct/indirect LED luminaire for general lighting applications. The 3-1/4” wide by 5-1/2” high extruded aluminum housing is offered for wall or cable suspended mounting. The two LED sources can be configured independently for both switching and lumen output. The BSS260 is Controls Capable, being offered with a variety of integrated control options.
Finishes
Performance
- Nominal Length: 45"
- Watts/ft.: 16.6 (2 X 8.3)
- Total Watts: 61.8
- Luminaire Lumens: 6082
- Efficacy (LPW): 98
Note: All data reflects fixtures with 3000K LEDs
Specifications
Fixture constructed of extruded aluminum housing, frosted extruded acrylic lenses and machined aluminum end caps.
Model variations offered for wall mount and cable suspended applications.
Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).
Satin anodize finish also available (may require additional lead time).
Available in nominal lengths of 2’–8′ single fixtures and continuous runs.
Basic continuous run fixtures provided with 18 ga. wiring harness for 6 Amp maximum load (consult factory for runs requiring sensor integration, etc.).
Standard integral 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available).
Remote mounted emergency battery backup available (ordered separately, consult factory for details).
Standard outputs are 5W and 8W nominal per foot, per lighting element.
LEDs available in 3000K, 3500K, 4000K, 5000K, all with a typical 84-85 CRI and color consistency within a 3 step MacAdam ellipse.
Life: 50,000 hours L70.
Bartco Lighting Controls Capable fixture available with integrated controls from a variety of suppliers.
Limited five year warranty.
UL and C-UL listed for dry and damp locations.
IBEW manufactured and assembled.
Made in U.S.A.
Product Data
Nominal Fixture Length
- 2: 22-5/8”
- 3: 33-5/8”
- 4: 44-5/8”
- 5: 55-5/8”
- 6: 66-5/8”
- 7: 77-5/8”
- 8: 88-5/8”
Actual dimension dependent on run configuration.
Correlated Color Temperature
- 30: 3000K-84 CRI
- 35: 3500K-85 CRI
- 40: 4000K-85 CRI
- 50: 5000K-85 CRI
Driver
- ND: non-dimming
- D: 0-10V, 1%
- DTR: triac, 1%
- DLV: electronic low voltage, 1%
- HES: Lutron EcoSystem, soft-on/fade-to-black, 1%
- EL: eldoLED ECOdrive 0-10V, 1%
- ES: eldoLED SOLOdrive 0-10V, 0.1%
- ELD: eldoLED ECOdrive DALI, 1%
- ESD: eldoLED SOLOdrive DALI, 0.1%
Watts/Foot
Direct and Indirect Output
- Direct | 5: 5 W/ft.
- Direct | 8: 8.3 W/ft.
- Indirect | 5: 5 W/ft.
- Indirect | 8: 8.3 W/ft.
- CF: consult factory for custom output
Mounting
- C4: cable mount 4' cable length
- C8: cable mount 8' cable length
- WM: wall mount
- CF: consult factory for custom mounting
Run Configuration
- SN: single
- ST: starter
- AD: adder
- TR: terminator
Options
- WS1A: Wattstopper FS-205, 100%-0% *
- WS1B: Wattstopper FS-205, 100%-50% *
- EN1: Enlighted FSD22 *
- ES4: Philips EasySense SNS211 MC *
- CA1: Casambi CBUA2D *
- NL1: nLight RES7 *
- NL2: nLight RIO *
- LA1: Lutron Athena AWN- D01-RF-WH *
- LA2: Lutron Athena AWN- D01-OCC-WH *
* See Integrated Controls section for driver compatibility information.
Circuit
- 1: single circuit
- 2: dual circuit
Section
Mounting Options
- Ø 1/16”x 48” (C4) or 96” (C8) aircraft cables
- 18 gauge x 60” (C4) or 108” (C8) SJT power cable (in coordinating finish)
- Bracket bars
- Ø 5” white canopies
- Ceiling couplers
- Side exit cable grippers
Ordering Code: C4 and C8
- Use appropriate fasteners through Ø3/16” holes in heay gauge mounting bracket
- 4” H x 4” W aluminum trim collar projects the fixture housing 3/4” from the wall surface
- Set screws
Ordering Code: WM
