Downloads
- Documentation
- Photometry
- BIM Files
Features
The BSS215 is a linear LED luminaire for general lighting applications. The 3-1/8” wide extruded aluminum housing is capped by a 2” tall, frosted, three-sided lens that produces a wide distribution of diffuse illumination. 1/4” thick machined aluminum end caps finish off the fixture ends. The BSS215 is Controls Capable, being offered with a variety of integrated control options.
Available for QuickShip.
Finishes
Performance
- Nominal Length: 4'
- Output: L: low | R: regular | H: high
- Lumens/ft.: L: 600 | R: 840 | H: 1135
- Watts/ft.: L: 5.0 | R: 7.8 | H: 11.1
- Luminaire Lumens: L: 2177 | R: 3100 | H: 4189
- Efficacy (LPW): L: 117 | R: 108 | H: 102
Note: All data reflects fixtures with 3500K LEDs and rectangular profile and solid ends
Lens Options
Rectangular profile with full height aluminum end cap
Ordering Code: A
Rectangular profile with aluminum end cap and frosted acrylic lens end
Ordering Code: B
Specifications
Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens and machined aluminum end caps.
Model variations offered for surface, wall mount and cable suspended mounting with solid or luminous end options.
Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).
Satin anodize finish also available (may require additional lead time).
Available in nominal lengths of 2’–8’ single fixtures and continuous runs.
Basic continuous run fixtures provided with 18 ga. wiring harness for 6 Amp maximum load (consult factory for runs requiring multiple circuits, sensor integration, etc.).
Standard integral 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available).
Integral 120-277V emergency battery backup available for 4’ nominal non-dim or 0-10V (consult factory for all other lengths/drivers).
Standard light outputs are 600, 840 or 1135 lumens per foot.
LEDs available in 3000K, 3500K, 4000K, 5000K, within a 3 step MacAdam ellipse, all with 80+ CRI typical.
Life: 50,000 hours L70.
Bartco Lighting Controls Capable fixture available with integrated controls from a variety of suppliers.
Limited five year warranty.
UL and C-UL listed for dry and damp locations.
IBEW manufactured and assembled.
Made in U.S.A.
Product Data
Nominal Fixture Length
- 2: 22-3/4”
- 3: 33-3/4”
- 4: 44-3/4”
- 5: 55-3/4”
- 6: 66-3/4”
- 7: 77-3/4”
- 8: 88-3/4”
Actual dimension dependent on run configuration
Correlated Color Temperature
- 30: 3000K-80+ CRI
- 35: 3500K-80+ CRI
- 40: 4000K-80+ CRI
- 50: 5000K-80+ CRI
Driver
- ND: non-dimming
- D: 0-10V, 1%
- DTR: triac, 1%, (120V ONLY)
- DLV: electronic low voltage, 1%, (120V ONLY)
- HES: Lutron EcoSystem, soft-on/fade-to-black, 1%
- EL: eldoLED ECOdrive 0-10V, 1%
- ES: eldoLED SOLOdrive 0-10V, 0.1%
- ELD: eldoLED ECOdrive DALI, 1%
- ESD: eldoLED SOLOdrive DALI, 0.1%
Mounting
- SM: surface mount
- WD: wall mount – direct
- C4: cable mount 4' cable length
- C8: cable mount 8' cable length
- CF: consult factory for custom mounting
Light Output
(lumens per foot)
- L: low – 600
- R: regular – 840
- H: high – 1135
- CF: consult factory for custom output
Run Configuration
- SN: single
- ST: starter
- AD: adder
- TR: terminator
Lens
- A: rectangular profile – solid end
- B: rectangular profile – luminous end
Options
- ED: emergency driver (4’ non-dim or 0-10V only)
- WS1A: Wattstopper FS- 205, 100%-0% *
- WS1B: Wattstopper FS- 205, 100%-50% *
- EN1: Enlighted FS-D22 *
- ES4: Philips EasySense SNS211 MC *
- CA1: Casambi CBU-A2D *
- NL1: nLight RES7 *
- NL2: nLight RIO *
- LA1: Lutron Athena A-WN-D01-RF-WH *
- LA2: Lutron Athena A-WN-D01-OCC-WH *
* See Integrated Controls section for driver compatibility information.
Section
Mounting Options
- Use appropriate fastener through Ø3/16” holes in housing
Ordering Code: SM
- 1-7/8” H x 4-1/2” W aluminum bracket projects the fixture housing 3/4” from the wall surface
Ordering Code: WD
- Ø 1/16”x 48” (C4) or 96” (C8) aircraft cables
- 60” (C4) or 108” (C8) power cable (in coordinating finish)
- Bracket bars
- Ø 5” white canopies
- Ceiling couplers
- Side exit cable grippers
Ordering Code: C4 and C8
