Downloads
- Documentation
- Photometry
Features
The Grom series GRM10 is a miniature, linear architectural luminaire for general lighting use. The 1-1/8” square extruded aluminum fixture is available for surface or cable mounting. Multiple remote driver options, 90+ CRI color temperatures, light outputs and finishes broaden application possibilities.
Finishes
Performance
- Nominal Length: 4'
- Output: R: regular | H: high
- Lumens/ft.: R: 350 | H: 600
- Watts/ft.: R: 4.3 | H: 7.9
- Luminaire Lumens: R: 1296 | H: 2216
- Efficacy (LPW): R: 81 | H: 76
Note: All data reflects fixture with 3500K LEDs
Specifications
Fixture constructed of an extruded aluminum housing, extruded acrylic lens and machined aluminum end caps
Model variations offered for surface and cable suspended applications
Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes)
Satin anodize finish also available (may require additional lead time)
Optional end cap with chamfered edges and lathe machined face available in mill aluminum finish
Surface mount models install with spring clips, are wired with 10’ low voltage leads and available with back or end feed options
Included standard remote 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available)
Remote mounted emergency battery backup available (ordered separately, consult factory for details)
Standard outputs are 350 and 600 lumens per foot
LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical
Life: 50,000 hours L70
Limited five year warranty
UL and C-UL listed for dry and damp locations
IBEW manufactured and assembled
Made in U.S.A.
Product Data
Nominal Fixture Length
Specify run length to the nearest 1”. Factory will configure using the least quantity of fixtures as close to the desired run length as possible. Run to be confirmed with a shop drawing.
- 23: 22-5/8”
- 28: 28-1/8”
- 34: 33-5/8”
- 39: 39-1/8”
- 45: 44-5/8”
- 50: 50-1/8”
- 56: 55-5/8”
- 61: 61-1/8”
- 67: 66-5/8”
- 72: 72-1/8”
- 78: 77-5/8”
- 83: 83-1/8”
- 89: 88-5/8”
Actual dimension dependent on run configuration
Correlated Color Temperature
- 27: 2700K-90+ CRI
- 30: 3000K-90+ CRI
- 35: 3500K-90+ CRI
- 40: 4000K-90+ CRI
Driver
- ND: non-dimming
- D: 0-10V, 1%
- DTR: triac, 1%, (120V ONLY)
- DLV: electronic low voltage, 1%, (120V ONLY)
- HES: Lutron EcoSystem, soft-on/fade-to-black, 1%
- EL: eldoLED ECOdrive 0-10V, 1%
- ES: eldoLED SOLOdrive 0-10V, 0.1%
- ELD: eldoLED ECOdrive DALI, 1%
- ESD: eldoLED SOLOdrive DALI, 0.1%
Note: Each fixture includes a remote driver matched for fixture length and light output
Mounting
- S1: surface mount back feed (SN only)
- S2: surface mount end feed (SN only)
- C4: cable mount 4’ cable length
- C8: cable mount 8’ cable length
- CF: consult factory for custom mounting
Light Output
(lumens per foot)
- R: regular – 350
- H: high – 600
- CF: consult factory for custom output
Run Configuration
- SN: single
- ST: starter
- AD: adder
- TR: terminator
Lens
- A: flush lens
Options
- LEC: lathe finish end cap
End cap finish is mill aluminum. Powder coating or satin anodizing will conceal the fine machined surface detail.
Section
Mounting Options
- Available for Single (SN) fixtures only
- 10’ low voltage leads exiting from the fixture back at an end
- One pair spring mounting clips for horizontal mounting (natural finish, requires #6 flat head screws by others)
Ordering Code: S1
- Available for Single (SN) fixtures only
- 10’ low voltage leads exiting from the fixture end
- One pair spring mounting clips for horizontal mounting (natural finish, requires #6 flat head screws by others)
Ordering Code: S2
- Ø 1/32”x 48” (C4) or 96” (C8) aircraft cables
- 60” (C4) or 108” (C8) low voltage cable (in coordinating finish)
- Bracket bars
- Ø 5” white canopies
- Canopy mount cable grippers
Ordering Code: C4 and C8
